Home >How you can fix error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read error
Introduction

Is error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read still troubling you? Do you want to solve it? Below is some vital information about error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read as well as how to remove it in Microsoft Windows. Besides, there are some general insights to help prevent frustrations during the process. You will learn a lot from this article.

Symptoms
error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read often turns up when your windows systems crashes and freezes of unreliable length and intensity.In most cases, you will meet with program lock-ups, slow PC performance, system freezes, blue screen errors, startup or shutdown problems, and installation issues.
Reasons

Error error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be readmight be caused by data corruption about the program. Additionally, there are a number of other causes which error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read can happen. As you know why you got this issue, you can expect to find a way to solve this problem.

Issues

Error error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read may bring about lots of issues ,such as

  • Hardware options crashed
  • Lacking privilege to read program
  • OS defaults
  • Needed background service corrupted
  • No agree to turn on system driver
  • program freezes , slow laptop performance, system freezes , startup and shut down matters , set-up matters , and hardware failure.So it's very important toremove the issueat first time .
Manual Solutions

If you are unable to solve error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read problem,please try the different steps outlined below to remove it. Don't worry ,just have a try.

  • Step 1:Please update drivers from the Device Manager:
    How to update drivers:
    a.Right click on Start button, type Device Manager and Enter.
    b.Find the drivers which needs to be installed and also see something with a yellow exclamation, probably under the "Universal Serial Bus Controllers" category. If yes, update it.
    c.Right click whatever device has a yellow exclamation and select "Uninstall".
    d.Go to the "Actions" Menu at top.Select "Scan for hardware changes". Windows will hopefully recognize the device now and load the proper driver.
    Step 2: If the issue persists, try updating the drivers in compatibility mode.
    Download the drivers from the computer manufacture's website for your Windows system if not available.
    Follow these steps to install the drivers in compatibility mode and check if that helps.
    a. Download the driver from the manufacturer's website.
    b. Right-click on the driver setup file and click on "properties".
    c. Click on the "compatibility" tab and check the box "Run this program in compatibility mode for" and select your Windows operating system from the drop down menu and proceed with the installation.
    d. Once this is done, restart the computer and check if the issue persists.Regarding your error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read,please perform a clean boot.
    How to perform a clean boot:
    1. Click Start,type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.
    2. Click the "Services" tab,check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
    3. Click the "Startup" tab,click "Disable All" and click "OK".
    4. Restart the computer and test the issue.
    Disclaimer: 1.After you used the clean boot to resolve your problem,please reset the computer to start as usual.
    2.Clean Boot is a troubleshooting step. If some programs have been disabled,we can re-enable them later. If you see the System Configuration Utility,check the box of "Don't show this message" and then click "OK".
Conclusion
From all the ways above, it is obvious that in order to remove error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read is a little complex for people. We recommend peopletry SmartPCFixerto deal with this error.
How to fix error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read by SmartPCFixer

Follow these 3 steps to repair error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read error easily:

How does it function

This software will scan and diagnose, then removes your PC with patent pending technology that fixes your system registry structure with both manually and autokinetic tools.Essential characteristics:launch-up customization,Troubleshooter Database,DLL Files Database,File Extension Database, on-line upgrade , system file checker, etc.

So it's highly recommended thatFree Downloadthe error fix tool,which will save you lots of time and trouble.

Notes &Warnings

1. Whatever steps you want to do for your computer, you had better log onas administrator.
2. In line withthe edition of Windows you're using, the above stepsmay be a littlediverse, but the basic process is mainly the same.
3.You can't connect to a PC which is asleep or hibernating, so make sure the settings for sleep and hibernation on the remote laptop are set to Never (hibernation isn't available on all PCs.)
4.Windows XP Home, Windows Media Center Edition, Windows Vista Home and Windows 7 Home or Starter are not supported without third party application.

Related Blogposts
Recommended Blogposts
Tags: error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read

Why Choose Us

  • 30+ tools to optimize your computer
    Easy to use, 1 click fix.
    Small Size,only about 4.5 MB
    Compatible with all systems
    All in one PC Care
    24/7 online support
    Recommended by experts and users
    60 days unconditional money-back guarantee

About SmartPCFixer

More than 2000,0000 Download Times

Current Version:5.2
File Size:4.5MB
Release Date:May 18, 2011
Operating System:Windows XP/2000/2003/2008/Vista/7/8/10
Languages:Multilingual(en,de,fr,es,it,jp,nl,pt,cn,hk) Download Time:2 seconds
Protection Against:BIOS , freezing, crashing, error messages etc. Learn more...

Awards

Share Us

Customer Comments

  • Peter BrownSays:
    Thanks a lot.I tried all steps. "SmartPCFixer" fixed error the instruction at 0x010bbfac referenced memory at 0x00000074 the memory could not be read. It's more effective than others.
  • Norton YaleSays:
    From I used it, I have loved my computer,It just looks like it was a new computer!
  • Elaine ShawSays: I have never believed that a software can remove computer errors easily,now I believe.
    Sidney SandySays:
    Want to quicken and optimize your laptop? Then choose SmartPCFixer!

Contact Us

  • Email:support@smartpcfixer.com
  • Telephone :1-(855)-771-64-55
  • Address:San Diego, USA

Random Posts

Category